No. Wi-fi is not required for the essential functions of MESI mTABLET but it is necessary for measurements to be synced to the MESI mRECORDS web application.

No. Once you put it in, it will be there whenever you need it. When you add the patient, they will appear on the patient list and you will be able to access their data with just one tap. You can always edit the data in the Patient tab by choosing Profile.

To use the wireless printing option of MESI mTABLET, you will need to install MESI Print Service to any computer that has installed Windows 7 OS or newer.

To set it up, please follow the instructions below:

  • Download MESI Print Service from MESI mRECORDS to install it.
    In the notification center, a new icon will pop up.
  • By double-clicking it you can set additional parameters such as the name of the PC and logo on a printout.
  • Once installed, go to Device settings on MESI mTABLET and open Printers.
  • To locate the new printer, click on Find printers on the wireless network. This should find the computer, which has MESI Print Service installed.
  • If the printer can’t be found due to different IP settings and subnets, please use the manual IP settings where you add the computer’s IP address.

Choose the desired wireless network and connect MESI mTABLET by scanning the QR code on the back of the docking station. If you would prefer to use a different network, please select it from the list and enter the security information.

Before any recordings can be performed, each module’s unit needs to be paired to MESI mTABLET.

  1. Take your MESI mTABLET and open the Doctor tab.
  2. Go to Settings -> Modules and tap + Add module in the lower right corner.
  3. The unit can be connected to the MESI mTABLET by holding the button for 4 seconds, which will put it into pairing mode, indicated by blue light.
  4. When a connection is successfully established, the light on top of the unit will turn green.
  5. Confirm the pairing process by pressing the button on top of the unit again. The final screen indicates the connection is successfully established.

Yes. When the measurement is completed, any comments can simply be added directly on the result screen. They will be stored and always available together with the report.

MESI mTABLET supports different integration services/protocols, which can be either simple one-way communication (saving PDFs to pre-determined location) or advanced integration with two-way communication, which enables ordering measurements and saving them directly to EHR/HIS platform. This can be done with a variety of formats such as standard HL7, GDT, DICOM, etc.

MESI mTABLET is specially designed and produced for healthcare professionals. Unlike consumer tablets, it is certified to comply with all medical regulatory requirements.

MESI mRECORDS is an out-of-the-box electronic medical record, to which all measurements and patient data are automatically stored and synchronized with. Since it is a web platform, it is accessible from anywhere at any time. All measurements and patient data are synced between MESI mTABLET and MESI mRECORDS, thus giving the medical expert instant access to recorded measurements.

The MESI mTABLET, a certified medical tablet, is a unique healthcare solution, integrating wireless diagnostic modules, patient records and medical apps in one system.

The docking station for MESI mTABLET comes with a built-in wi-fi access point to which the tablet can be connected by scanning the QR code on the back of the docking station.

Loading...
Loading...